Cisco Catalyst 2960-L Series Switches |
Model Number |
WS-C2960L-48PS-LL |
Configurations |
10/100/1000 Ethernet Ports |
48 |
Uplink Interfaces |
4 SFP |
Available PoE Power |
370W |
Fanless |
Yes |
Dimensions (H x D x W) |
1.73 x 11.5 x 17.5 in. (4.4 x 29.2 x 44.5 cm) |
Weight |
10.25 lb (4.65 kg) |
Console Ports |
RJ45 Ethernet |
1 |
USB mini-B |
1 |
USB-A port for storage and Bluetooth console |
1 |
Memory and Processor |
CPU |
ARMv7 800 MHz |
DRAM |
512 MB |
Flash memory |
256 MB |
Performance |
Forwarding bandwidth |
52 Gbps |
Switching bandwidth |
104 Gbps |
Forwarding rate (64-byte L3 packets) |
77.38 Mpps |
Unicast MAC addresses |
8K |
Maximum active VLANs |
64 |
VLAN IDs available |
4094 |
Maximum STP instances |
64 |
Maximum SPAN sessions |
1 |
MTU-L3 packet |
9198 bytes |
Jumbo Ethernet frame |
10,240 bytes |
MTBF in hours (Data) |
1,370,769 |
MTBF in hours (PoE) |
437,970 |
Environment |
Operating temperature Up to 5,000 ft |
23ºF to 113ºF (–5ºC to 45ºC)
WS-C2960L-16PS-LL has maximum operating temperature of 40°C (up to 5,000 ft) and 35°C (up to 10,000 ft)
|
Operating temperature Up to 10,000 ft |
23ºF to 104ºF (–5ºC to 40ºC) |
Operating altitude |
10,000 ft (3000m) |
Operating relative humidity |
5% to 90% at 40ºC |
Storage temperature |
–13º to 158ºF (–25º to 70ºC) |
Storage altitude |
15,000 ft (4500m) |
Storage relative humidity |
5% to 95% at 65ºC |
Storage altitude |
Note: Minimum ambient temperature for cold start is 0°C (32°F) |
Electrical |
Voltage (autoranging) |
Data: 110 to 220V AC in PoE: 110 to 220V AC in |
Switching bandwidth |
Data: 50 to 60 Hz PoE: 50 to 60 Hz |
Forwarding rate (64‑byte L3 packets) |
Data: 0.29A to 0.48A PoE: 0.37A to 0.64A |
Unicast MAC addresses |
Data: 0.09 kVA PoE: 0.48 kVA |
Safety and Compliance |
Safety |
UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 |
EMC: emissions |
47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A |
EMC: immunity |
EN55024, CISPR24, EN300386, KN24 |
Environmental |
Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU |
Telco |
Common Language Equipment Identifier (CLEI) code |
U.S. government certifications |
USGv6 and IPv6 Ready Logo |
Connectors and Interfaces |
Ethernet interfaces |
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
|
SFP and SFP+ interfaces |
For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables at cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html |
Indicator LEDs |
Per-port status: link integrity, disabled, activity, speed, and full duplex
System status: system, PoE, and link speed
|
Console cables |
CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors
|
Power |
Use the supplied AC power cord to connect the AC power connector to an AC power outlet |