| Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base Software |
| Model Number |
WS-C2960-24TC-L |
| Gigabit Uplinks with 10/100 Ethernet Connectivity |
| Description |
24 Ethernet 10/100 ports |
| Uplinks |
2 dual-purpose ports |
| Available PoE Power |
—- |
| Performance and Scalability Numbers for All Switch Models |
| Forwarding bandwidth |
16 Gbps |
| Switching bandwidth |
32 Gbps |
| Flash memory |
32 MB |
| Memory DRAM |
64 MB |
| MAX VLANs |
255 |
| VLAN IDs |
4000 |
| Maximum transmission unit (MTU) |
Up to 9000 bytes |
| Jumbo frames |
9018 bytes (2960G only) |
| Forwarding Rates: 64-Bytes packets |
6.5 Mpps |
| Resources |
| Unicast MAC address |
Default: 8000
QoS: 8000
Dual: 8000
|
| IPv4 IGMP groups |
Default: 255
QoS: 255
Dual: 255
|
| IPv4 MAC QoS access control entries (ACEs) |
Default: 128
QoS: 384
Dual: 0
|
| IPv4 MAC security ACEs |
Default: 384
QoS: 128
Dual: 256
|
| Dimensions, weight, acoustic, MTBF and environmental range |
| Dimensions (H x W x D) |
Inches: 1.73 x 17.7 x 9.52
Centimeters: 4.4 x 45 x 23.6
|
| Weight |
Pounds: 8
Kilograms: 3.6
|
| Mean time between failures (MTBF) |
339,743 |
| Connectors and LED Indicators |
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 UTP cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-SX -LX/LH, -ZX, -BX, -T, -FX, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
100BASE-LX, -BX, -FX SFP-based ports: LC fiber connectors (single/multimode fiber)
GLC-T and GLC-GE-100FX are not supported on the Catalyst 2960-8TC-S, 2960-8TC-L, or 2960G-8TC-L switches. |
| Management |
BRIDGE-MIB
CISCO-CABLE-DIAG-MIB
CISCO-CDP-MIB
CISCO-CLUSTER-MIB
CISCO-CONFIG-COPY-MIB
CISCO-CONFIG-MAN-MIB
CISCO-DHCP-SNOOPING-MIB
CISCO-ENTITY-VENDORTYPE-OID-MIB
CISCO-ENVMON-MIB
CISCO-ERR-DISABLE-MIB
CISCO-FLASH-MIB
CISCO-FTP-CLIENT-MIB
CISCO-IGMP-FILTER-MIB
CISCO-IMAGE-MIB
CISCO-IP-STAT-MIB
CISCO-LAG-MIB
CISCO-MAC-NOTIFICATION-MIB
CISCO-MEMORY-POOL-MIB
CISCO-PAGP-MIB
CISCO-PING-MIB
CISCO-POE-EXTENSIONS-MIB
CISCO-PORT-QOS-MIB
CISCO-PORT-SECURITY-MIB
CISCO-PORT-STORM-CONTROL-MIB
CISCO-PRODUCTS-MIB
CISCO-PROCESS-MIB
CISCO-RTTMON-MIB
CISCO-SMI-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-SYSLOG-MIB
CISCO-TC-MIB
CICSO-TCP-MIB
CISCO-UDLDP-MIB
CISCO-VLAN-IFTABLE
RELATIONSHIP-MIB
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-VTP-MIB
ENTITY-MIB
ETHERLIKE-MIB
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
IF-MIB
INET-ADDRESS-MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-FLASH-MIB
OLD-CISCO-INTERFACES-MIB
OLD-CISCO-IP-MIB
OLD-CISCO-SYS-MIB
OLD-CISCO-TCP-MIB
OLD-CISCO-TS-MIB
RFC1213-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMPv2-MIB
TCP-MIB
UDP-MIB
ePM MIB
|
| Standards |
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.1s
IEEE 802.1w
IEEE 802.1X
IEEE 802.1ab (LLDP)
IEEE 802.3ad
IEEE 802.3af
IEEE 802.3ah (100BASE-X single/multimode fiber only)
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
100BASE-BX (SFP)
100BASE-FX (SFP)
100BASE-LX (SFP)
1000BASE-BX (SFP)
1000BASE-SX (SFP)
1000BASE-LX/LH (SFP)
1000BASE-ZX (SFP)
1000BASE-CWDM SFP 1470 nm
1000BASE-CWDM SFP 1490 nm
1000BASE-CWDM SFP 1510 nm
1000BASE-CWDM SFP 1530 nm
1000BASE-CWDM SFP 1550 nm
1000BASE-CWDM SFP 1570 nm
1000BASE-CWDM SFP 1590 nm
1000BASE-CWDM SFP 1610 nm
10GBASE-LR (SFP+)
10GBASE-SR (SFP+)
10GBASE-LRM (SFP+)
10GBASE-CX1 (SFP+)
RMON I and II standards
SNMP v1, v2c, and v3
|
| RFC compliance |
RFC 768 – UDP
RFC 783 – TFTP
RFC 791 – IP
RFC 792 – ICMP
RFC 793 – TCP
RFC 826 – ARP
RFC 854 – Telnet
RFC 951 – Bootstrap Protocol (BOOTP)
RFC 959 – FTP
RFC 1112 – IP Multicast and IGMP
RFC 1157 – SNMP v1
RFC 1166 – IP Addresses
RFC 1256 – Internet Control Message Protocol (ICMP) Router Discovery
RFC 1305 – NTP
RFC 1492 – TACACS+
RFC 1493 – Bridge MIB
RFC 1542 – BOOTP extensions
RFC 1643 – Ethernet Interface MIB
RFC 1757 – RMON
RFC 1901 – SNMP v2C
RFC 1902-1907 – SNMP v2
RFC 1981 – Maximum Transmission Unit (MTU) Path Discovery IPv6
FRC 2068 – HTTP
RFC 2131 – DHCP
RFC 2138 – RADIUS
RFC 2233 – IF MIB v3
RFC 2373 – IPv6 Aggregatable Addrs
RFC 2460 – IPv6
RFC 2461 – IPv6 Neighbor Discovery
RFC 2462 – IPv6 Autoconfiguration
RFC 2463 – ICMP IPv6
RFC 2474 – Differentiated Services (DiffServ) Precedence
RFC 2597 – Assured Forwarding
RFC 2598 – Expedited Forwarding
RFC 2571 – SNMP Management
RFC 3046 – DHCP Relay Agent Information Option
RFC 3376 – IGMP v3
RFC 3580 – 802.1X RADIUS
|
| Voltage and power information |
Voltage (Autoranging): 100 to 240 VAC
Current: 1.3 to 0.8A
Frequency: 50 to 60Hz
|
| DC input voltages (RPS input) |
12V at 5 A
5 A
|
| 100% Throughput Measured Power Consuption |
27W |
| 5% Thoughput Measured Consumption |
24W |
| 5% Throughput (with 50 Percent PoE Loads) |
LpA (Typical): 39 dB
LpAD (Maximum): 43 dB |
| Safety and Compliance |
| Safety certifications |
UL 60950-1, Second Edition
CAN/CSA 22.2 No. 60950-1, Second Edition
TUV/GS to EN 60950-1, Second Edition
CB to IEC 60950-1 Second Edition with all country deviations
CE Marking
NOM (through partners and distributors)
|
| Electromagnetic emissions certifications |
FCC Part 15 Class A
EN 55022 Class A (CISPR22)
EN 55024 (CISPR24)
AS/NZS CISPR22 Class A
CE
CNS13438 Class A
MIC
GOST
China EMC Certifications
|
| Environmental |
Reduction of Hazardous Substances (ROHS) 5 |
| Telco |
Common Language Equipment Identifier (CLEI) code |
