| Cisco Catalyst 2960-X Series Switches |
| Model Number |
WS-C2960XR-48FPD-I |
| Gigabit Uplinks with 10/100 Ethernet Connectivity |
| 10/100/1000 Ethernet Interfaces |
48 |
| Uplink Interfaces |
2 SFP+ |
| Cisco IOS Software Feature Set |
IP Lite |
| Available PoE Power |
740W |
| Power Supply |
1025WAC |
| Performance and Scalability Numbers for All Switch Models |
| Unicast MAC Addresses |
Default: 16K
VLAN: 32K
IPv4: 16K |
| IPv4 Unicast Direct Routes |
Default: 4K
VLAN: 250
IPv4: 16K |
| IPv4 Unicast Indirect Routes |
Default: 1.25K
VLAN: 250
IPv4: 8K |
| IPv6 Unicast Direct Routes |
Default: 4K
VLAN: 250
IPv4: 0 |
| IPv6 Unicast Indirect Routes |
Default: 1.25K
VLAN: 250
IPv4: 0 |
| IPv4 Multicast Routes and IGMP Groups |
Default: 1K
VLAN: 32K
IPv4: 1K |
| IPv6 Multicast Groups |
Default: 1K
VLAN: 1K
IPv4: 0 |
| IPv4 QoS ACEs |
Default: 500
VLAN: 500
IPv4: 500 |
| IPv6 QoS ACEs |
Default: 250
VLAN: 500
IPv4: 0 |
| IPv4 Security ACEs |
Default: 1K
VLAN: 1K
IPv4: 875 |
| IPv6 Security ACEs |
Default: 500
VLAN: 500
IPv4: 0 |
| IPv4 Policy Based Routing ACEs |
Default: 500
VLAN: 0
IPv4: 375 |
| Dimensions, weight, acoustic, MTBF and environmental range |
| Dimensions (H x W x D) |
- Inches: 1.75 x 16.0 x 17.5
- Centimeters: 4.45 x 40.8 x 44.5
|
| Weight |
- Pounds: 14.6
- Kilograms: 6.6
|
| Environmental Ranges |
| Operating temperature up to 5000 ft (1500 m) |
23° to 113°F
-5° to 45°C |
| Operating temperature up to 10,000 ft (3000 m) |
23° to 104°F
-5° to 40°C |
| Short-term exception at sea level |
23° to 31°F
-5° to 55°C |
| Short-term exception up to 5000 feet (1500 m) |
23° to 122°F
-5° to 50°C |
| Short-term exception up to 10,000 feet (3000 m) |
23° to 113°F
-5° to 45°C |
| Short-term exception up to 13,000 feet (4000 m) |
23° to 104°F
-5° to 40°C |
| Storage temperature up to 15,000 feet (4573 m) |
-13° to 158°F
-25° to 70°C |
| Operating altitude |
Up to 10,000 feet
Up to 3,000 meters |
| Storage altitude |
Up to 13,000 feet
Up to 4,000 meters |
| Operating relative humidity |
10% to 95% noncondensing |
| Storage relative humidity |
10% to 95% noncondensing |
| Management and Standards Support for Cisco Catalyst 2960-S and 2960 Series Switches with LAN Base Software |
| Management |
- BRIDGE-MIB
- CISCO-CABLE-DIAG-MIB
- CISCO-CDP-MIB
- CISCO-CLUSTER-MIB
- CISCO-CONFIG-COPY-MIB
- CISCO-CONFIG-MAN-MIB
- CISCO-DHCP-SNOOPING-MIB
- CISCO-ENTITY-VENDORTYPE-OID-MIB
- CISCO-ENVMON-MIB
- CISCO-ERR-DISABLE-MIB
- CISCO-FLASH-MIB
- CISCO-FTP-CLIENT-MIB
- CISCO-IGMP-FILTER-MIB
- CISCO-IMAGE-MIB
- CISCO-IP-STAT-MIB
- CISCO-LAG-MIB
- CISCO-MAC-NOTIFICATION-MIB
- CISCO-MEMORY-POOL-MIB
- CISCO-PAGP-MIB
- CISCO-PING-MIB
- CISCO-POE-EXTENSIONS-MIB
- CISCO-PORT-QOS-MIB
- CISCO-PORT-SECURITY-MIB
- CISCO-PORT-STORM-CONTROL-MIB
- CISCO-PRODUCTS-MIB
- CISCO-PROCESS-MIB
- CISCO-RTTMON-MIB
- CISCO-SMI-MIB
- CISCO-STP-EXTENSIONS-MIB
- CISCO-SYSLOG-MIB
- CISCO-TC-MIB
- CICSO-TCP-MIB
- CISCO-UDLDP-MIB
- CISCO-VLAN-IFTABLE
- RELATIONSHIP-MIB
- CISCO-VLAN-MEMBERSHIP-MIB
- CISCO-VTP-MIB
- ENTITY-MIB
- ETHERLIKE-MIB
- IEEE8021-PAE-MIB
- IEEE8023-LAG-MIB
- IF-MIB
- INET-ADDRESS-MIB
- OLD-CISCO-CHASSIS-MIB
- OLD-CISCO-FLASH-MIB
- OLD-CISCO-INTERFACES-MIB
- OLD-CISCO-IP-MIB
- OLD-CISCO-SYS-MIB
- OLD-CISCO-TCP-MIB
- OLD-CISCO-TS-MIB
- RFC1213-MIB
- RMON-MIB
- RMON2-MIB
- SNMP-FRAMEWORK-MIB
- SNMP-MPD-MIB
- SNMP-NOTIFICATION-MIB
- SNMP-TARGET-MIB
- SNMPv2-MIB
- TCP-MIB
- UDP-MIB
- ePM MIB
|
| Standards |
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1p CoS Prioritization
- IEEE 802.1Q VLAN
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab (LLDP)
- IEEE 802.3ad
- IEEE 802.3af
- IEEE 802.3ah (100BASE-X single/multimode fiber only)
- IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
- IEEE 802.3 10BASE-T specification
- IEEE 802.3u 100BASE-TX specification
- IEEE 802.3ab 1000BASE-T specification
- IEEE 802.3z 1000BASE-X specification
- 100BASE-BX (SFP)
- 100BASE-FX (SFP)
- 100BASE-LX (SFP)
- 1000BASE-BX (SFP)
- 1000BASE-SX (SFP)
- 1000BASE-LX/LH (SFP)
- 1000BASE-ZX (SFP)
- 1000BASE-CWDM SFP 1470 nm
- 1000BASE-CWDM SFP 1490 nm
- 1000BASE-CWDM SFP 1510 nm
- 1000BASE-CWDM SFP 1530 nm
- 1000BASE-CWDM SFP 1550 nm
- 1000BASE-CWDM SFP 1570 nm
- 1000BASE-CWDM SFP 1590 nm
- 1000BASE-CWDM SFP 1610 nm
- 10GBASE-LR (SFP+)
- 10GBASE-SR (SFP+)
- 10GBASE-LRM (SFP+)
- 10GBASE-CX1 (SFP+)
- RMON I and II standards
- SNMP v1, v2c, and v3
|
| RFC compliance |
- RFC 768 – UDP
- RFC 783 – TFTP
- RFC 791 – IP
- RFC 792 – ICMP
- RFC 793 – TCP
- RFC 826 – ARP
- RFC 854 – Telnet
- RFC 951 – Bootstrap Protocol (BOOTP)
- RFC 959 – FTP
- RFC 1112 – IP Multicast and IGMP
- RFC 1157 – SNMP v1
- RFC 1166 – IP Addresses
- RFC 1256 – Internet Control Message Protocol (ICMP) Router Discovery
- RFC 1305 – NTP
- RFC 1492 – TACACS+
- RFC 1493 – Bridge MIB
- RFC 1542 – BOOTP extensions
- RFC 1643 – Ethernet Interface MIB
- RFC 1757 – RMON
- RFC 1901 – SNMP v2C
- RFC 1902-1907 – SNMP v2
- RFC 1981 – Maximum Transmission Unit (MTU) Path Discovery IPv6
- FRC 2068 – HTTP
- RFC 2131 – DHCP
- RFC 2138 – RADIUS
- RFC 2233 – IF MIB v3
- RFC 2373 – IPv6 Aggregatable Addrs
- RFC 2460 – IPv6
- RFC 2461 – IPv6 Neighbor Discovery
- RFC 2462 – IPv6 Autoconfiguration
- RFC 2463 – ICMP IPv6
- RFC 2474 – Differentiated Services (DiffServ) Precedence
- RFC 2597 – Assured Forwarding
- RFC 2598 – Expedited Forwarding
- RFC 2571 – SNMP Management
- RFC 3046 – DHCP Relay Agent Information Option
- RFC 3376 – IGMP v3
- RFC 3580 – 802.1X RADIUS
|
| Voltage and power information |
- Voltage (Autoranging): 100 to 240 VAC
- Current: 10A to 5A
- Frequency: 50 to 60 Hz
|
| 0% Traffic |
46.7 |
| 10% Traffic |
61.8 |
| 100% Traffic |
62.5 |
| Weighted Average |
61.9 |
